DOWNLOADS.

This page is dedicated to downloading our software.

CONTACT SUPPORT TEAM

NETRI UpLink.

NETRI UpLink installer v1.4.1 - September 2025.

Changelog:

1. User Interface updated for Windows 11 compatibility.

2. Progress bar recalibrated: goes from 0% to 50% during AxIS Navigator computation and 50% to 100% during report filling and raster plot generation.

3. Freezing User Interface at the end of the process resolved.

DOWNLOAD UPLINK v1.4.1

NETRI UpLink installer v1.4.0 - June 2025.

Changelog:

1. Architecture DuaLink(TM) Well MEA taken into account. In AxIS Navigator the corresponding plate map is “NETRI NeoBento MEA – Pro” and “NETRI NeoBento(TM) MEA – Edge”.

2. Viability module compatibility. If the viability module is active during the recording, the viability data (resistance values) will carry on to the NETRI UpLink Report as a new column in the electrode metrics tab.

NETRI UpLink installer v1.3.0 - November 2024.

Changelog:

1. A Progress bar has been added to the GUI.

2. The process of NETRI UpLink has been accelerated.

3. A Cancel button has been added, Note: if the process is canceled, AxIS Navigator needs to be stopped and restarted to restart a process with NETRI UpLink.

4. Cosmetic issues have been fixed in the NETRI UpLink report: size of notes and rows height.

5. Both burst detector settings are now possible. Only Inter-Spike Interval was previously possible, now Poisson surprise is also implemented.

NETRI UpLink installer v1.2.2 - July 2024.

Changelog:

1. Raster Plot bug fixed when no spike in compartment.

DOWNLOAD UPLINK v1.2.2

NETRI UpLink installer v1.2.1 - March 2024.

Changelog:

1. Digital filter compatible.

1. All different settings of spike detection taken into account.

DOWNLOAD UPLINK v1.2.1

FAQ.

Reposition the QuarterBento (top left corner) in its location and engage its four clips at the periphery by gently pressing a plug on the QuarterBento. For sterility reasons, always handle the QuarterBento with gloves and under a flow hood.
Remove the vacuum bag, place the lid on the NeoBento and place it in a clean vacuum dessicator for 30-45 min before processing to chip preparation.
Verify the level of water into the labyrinth, both in the NeoBento frame and the plug. Remember that you have to fill up below the height of the shorter labyrinth walls.
The concentrations mentioned in the Operating Protocol are indicatives. They were determined after counting cells with a Septer (Merck Millipore - diameter size: 7-16 µm) but may vary depending on the counting technique. If you want to adjust the concentrations for future experiments, perform seeding tests with different increasing cell concentrations to establish the optimal concentration for your experiments.
Neurite extension may be difficult to observe in transmitted light over the microchannels. If you have the possibility to stain the cells, check with a fluorescent stain for the absence or presence of neurites.
Remove the bottom cover and verify the absence of humidity on the bottom of the chips and/or the surface of the bottom cover.
CONTACT SUPPORT TEAM
BOOK A MEETING

MICROFLUIDICS IS NOW JUST
1-CLICK AWAY WITH NETRI SHOP

Discover our new exclusive package
organs-on-chip kits and all our
neuro-organs-on-chip devices.

Shop now
DISCOVER OoC KITS

EXCLUSIVE PACKAGE

ORGANS-ON-CHIP KITS

Quickly and easily adopt organs-on-chip

into users’ research

DISCOVER